General provisions
This guide contains detailed information on assembling a house kit made using SIPwall technology. Thoroughly developed internal design standards for house kits, trained staff and a quality control department guarantee the high quality of your future home.
We produce guaranteed high-quality houses (house kits) from SIP panels at our own factory for fast-build houses, located in Ivanovo Region, Shuya, in a modern production facility. When it leaves the house factory, the house kit is 90% complete. All this lets our clients be sure that they are buying a ready-made house kit (an adult “LEGO” building set) in which all SIP panels are numbered, cut and framed with dry planed timber produced by SIPwall, in accordance with the design documentation.
The house kit assembly recommendations developed by SIPwall for a house kit made using SIPwall technology will help you achieve your goals. “SIPwall” reserves the right to make any changes to this guide without notifying the client.
List of referenced documents
- SP 4.13130.2013 Fire safety of buildings and structures
- SP 52.13330.2011 Natural and artificial lighting
- Federal Law No. 123-FZ of July 22, 2008. Technical Regulations on Fire Safety Requirements
- SP 70.13330.2012 Load-bearing and enclosing structures
- SP 64.13330.2011 Timber structures
- SP 20.13330.2011 Loads and actions
- SP 50.13330.2012 Thermal protection of buildings
- SP 7.13130.2013 “Heating, ventilation and air conditioning. Fire safety requirements”
- TU 16.23.19-001-44755395-2017 Three-layer panels with expanded polystyrene board insulation “SIPwall”
- TU 16.23.19-006-44755395-2018 Edged planed board
- TU 16.23.19-007-44755395-2018 Edged board
- TU 16.23.19-005-44755395-2018 “SIPwall” glued laminated timber I-beams
- TU 16.23.19-008-44755395-2018 Floor beams